Author: Gé Brander

The blog post of Jay about running Windows Server 2012 R2 on an Intel NUC 54250WYKH and the problems with the on-board network card do apply to Windows Server 2016 CTP4 too.

Keith H. contacted me today (2016/02/23) about the Wireless network card on the Intel NUC 5i5 RYH. I added the steps to install the Wireless network card on the bottom.

Today I installed Windows Server 2016 CTP 4 on my Intel NUC 5i5RYH and encountered the same problem with a non-recognized network card. Intel has decided in all its wisdom to not let you install network card drivers when you are using a Microsoft Server operating system. As described in the blog post of Jay it is however possible to install the network card drivers. The method described works on most hardware with drivers that do not support a Windows Server operating system. The details will change with different hardware.

Warning!To install drivers with an edited INF file you need to trick Windows to install them. With some BCDEDIT commands this can be done. Please make sure the drivers you want to install are legitimate Intel drivers and not downloaded from some rogue site. Because you make some changes to the INF file Windows cannot verify the source of the drivers. There are some checksums for the driver files (included the INF file) and when you edit them the checksum is not valid anymore. When you use the official Intel drivers from the Intel site and you only adjust the INF file as mentioned below you are reasonably safe.

Be very careful not to install drivers from a non-trustworthy source!

Below the steps I took for the Intel NUC 5i5RYH:

  • Login to your Intel NUC 5i5RYH after you installed Windows Server 2016 CTP4
  • Run a CMD command prompt with Administrator privileges (Windows key + R and type CMD and press CTRL + SHIFT + ENTER) and run the following BCDEDIT commands.

bcdedit /set TESTSIGNING ON
bcdedit /set nointegritychecks ON

  • These commands switch the Driver Enforcement off so non verified drivers can be installed.
  • Restart the Intel NUC 5i5RYH.
  • The following part must be done on another computer because you still have no network on your NUC.
  • Download the latest driver for the Intel NUC 5i5RYH network card (link). I downloaded to [C:\Install].
  • Download WinRAR (link).
  • Expand using WinRAR the network card driver package. I unpacked to [C:\Install\LAN_Win10_64_20.4.1].
  • Look at the properties of the network card in [Computer Management], [Device Manager], [Details] and [Hardware ids]. In case of the Intel NUC 5i5RYH the string of text you need is: [VEN_8086&DEV_15A].


  • Using PowerShell find the INF files in the directory where you unpacked the drivers files.
    • Get-ChildItem -recurse | Select-String -pattern “VEN_8086&DEV_15A” | group path | select name
  • The result should look like this:


  • The INF file you need depends on the operating system you are using. [e1d65x64.inf] is for Windows 10 and Windows 2016, [e1d64x64.inf] is for Windows 8.1 and Windows 2012 R2.
  • In my case I needed the driver for Windows 2016 so browse to the directory with the [e1d65x64.inf] file.
  • Open the [e1d65x64.inf] file with notepad and change the following lines:
  • Change the following lines:

ExcludeFromSelect = \

  • To: (put an [;] before the three lines after [ControlFlags])

;ExcludeFromSelect = \
; PCI\VEN_8086&DEV_153A,\
; PCI\VEN_8086&DEV_153B

  • Next find the following lines below the [ControlFlags] section, the lines are marked blue below and copy those lines.


  • Next find the [Intel.NTamd64.10.1] section and paste the blue lines below the last line of this section.


  • The result should look like this:


  • Save the file and copy the C:\Install directory to an USB stick.
  • Log on to your Intel NUC 5i5RYH.
  • Copy all of the files from the USB stick to the C:\Install directory on your Intel NUC 5i5RYH.
  • Before you move on check if the message [Test Mode] is visible. If not then go back to the first step and run the BCDEDIT commands again and reboot.


  • Go to [Device Manager], [Properties] of the network card and choose [Update Driver…] from the [General] tab.


  • Next choose [Browse my computer for driver software].


  • Browse to the location of the edited driver files, in this case [C:\Install\LAN_Win10_64_20.4.1\PRO1000], and click [Next].


  • When the drivers are found and installed a warning will be displayed [Windows can’t verify the publisher of this driver software] choose [Install this driver software anyway].


  • After the installation of the driver software is finished the message should look like this:


  • Click [Close] and go back to [Device Manager] to check if the network adapter is now correctly installed.


  • Next run the following BDCEDIT commands:

bcdedit /set TESTSIGNING OFF
bcdedit /set nointegritychecks OFF

  • These commands switch the Driver Enforcement back on so non verified drivers cannot be installed anymore.
  • After running the BCDEDIT commands the Intel NUC 5i5RYH needs to be rebooted and now you have a functional network card.
  • To be sure check if the [Test Mode] message is removed from the desktop!


Good luck with installing the drivers on your Intel NUC 5i5RYH! This method will work for other hardware and drivers too. Just be careful not to install drivers from an untrustworthy source.

Steps to install the Wireless Network Card (added on 2016/02/23) thanks to Keith H.

  1. Clean install Windows Server 2016 TP4 build 10586 (downloaded from
  2. Add Wireless LAN feature; enable automatic restart
  3. Complete Wireless LAN feature installation (watching device manager correctly detects wireless LAN adapter… but I’m not able to connect to my access point)
  4. Reboot NUC
  5. Connect to access point correctly…

After these steps my WiFi card works perfectly. Good luck again!

If you need the drivers for the WiFi card they can be found here:

  1. Download the Windows 10 x64 drivers for the Intel Dual Band Wireless-AC 7265 network card

When creating Word documents that should be reused as a template it is easy to use custom Word document properties. Those custom properties can be used as fields in a Word document. So when you need to create a new document with different values there are two ways.

First you can use CTRL + H (find and replace) to search through your document and find and replace values. This may be easy for documents where there are only a few changes needed.

Second you can use custom properties and fields within Word. By changing the custom properties and updating all the fields (CTRL + A and update) it is a very convenient way of changing larger numbers of custom properties.

I am using the second method for some years now but in some situations with a lot of custom document properties the interface is not the easiest way to go. Especially when you have information that needs to go into the Word document that can be created in an Excel sheet.

With PowerShell I am now able to read all the custom properties from an Excel sheet and add or update them to a Word file.

The PowerShell script askes for the Excel file, the Word file and it asks which sheet from the Excel file must be used.

Check the attached script to learn something of PowerShell or use it to your advance.

There is a small bug in PowerShell when it comes to opening and closing Excel files. Therefore you need to save and close all Excel files on your computer before you start the script. Otherwise some data loss may be possible. Sorry for that, I did not find a solution for this small bug on the Internet.

On the 12th of October 2015 Gartner has released the new “Magic Quadrant for Operational Database Management Systems”. Microsoft’s SQL Server is now the leader in the Magic Quadrant.

Quotes from the Gartner site:

  • Market vision: Microsoft’s market-leading vision consists of NoSQL (Azure Document DB and Azure Tables), cloud offerings (including hybrid cloud), the use of analytics in transactions (HTAP) and support for mobility. Its vision for in-memory computing across products, hybrid cloud implementations and a “cloud first” strategy is ahead of its competitors.
  • Strong execution: Microsoft SQL Server is an enterprise wide, mission-critical DBMS capable of competing with products from the other large DBMS vendors. Gartner’s 2014 market share data shows Microsoft as the No. 2 vendor in terms of total DBMS revenue.
  • Performance and support: Reference customers were very positive, with the performance of SQL Server, documentation, support, ease of installation, integration and operation all rated highly.

Of course there are some cautions too. The first is the perception that Microsoft SQL Server is not used in mission-critical enterprise wide applications.

  • Market image: Although SQL Server is an enterprise-class DBMS, Microsoft continues to struggle to dispel a perception of weakness in this area. Inquiries from Gartner clients demonstrate a continuing perception that SQL Server is not used for mission-critical enterprise wide applications — a view that inhibits wider use of SQL Server as a primary, enterprise-class DBMS.
  • Lack of an appliance: Microsoft still lacks an appliance for transactions (one comparable to its Microsoft Analytics Platform System, formerly Parallel Data Warehouse). By contrast, its major competitors (IBM, Oracle and SAP) all offer one, as does one new entrant to the Magic Quadrant (Fujitsu).
  • Pricing: Microsoft received below-average ratings for pricing suitability, a problem that stems from the pricing model changes implemented in SQL Server 2012. Microsoft’s cloud offerings appear to be partially mitigating this concern.

On the 17th of August Cumulative Update 2 for Microsoft SQL Server 2014 SP1 ​has been released​.

On the 17th of August Cumulative Update 9 for Microsoft SQL Server 2014 RTM has been released​.

SQL Server Support Information: